Thick section acrylonitrile rubber parts mechanical properties under compression and abrasive wear resistance

Thick section acrylonitrile rubber parts mechanical properties under compression and abrasive wear resistance

In this work the mechanical properties variability under uniaxial compression and the abrasive wear through the cross section of thick-piece carbon-black reinforced acrylonitrile rubber (NBR) parts, was studied. It has to take into account that in these type of pieces, the vulcanized rubber properti...

Descrizione completa

Dettagli Bibliografici
Autori principali:	Velásquez-Restrepo, Sandra Milena, Giraldo-Vásquez, Diego Hernán, Zapata-Gallego, Natalia Trinidad
Natura:	Online
Lingua:	spa
Pubblicazione:	Universidad Pedagógica y Tecnológica de Colombia 2015
Soggetti:	NBR rubber uniaxial compression tests abrasive wear Caucho NBR Pruebas de compresión uniaxial Desgaste abrasivo
Accesso online:	https://revistas.uptc.edu.co/index.php/ingenieria/article/view/3849

Documenti analoghi

Effect of Thermal Cycling on Abrasive Wear Response of Cu-1.9Be-0.25(Co+Ni) Alloy
di: Higuera-Cobos, Oscar Fabián, et al.
Pubblicazione: (2020)

Abrasive wear in wear plates and hard coatings applied by welding with shielded electrode
di: Marulanda-Arévalo, José Luddey, et al.
Pubblicazione: (2017)

Microstructural evolution during austempering of a ASTM A-532 CLASS III type high chromium white cast iron undergoing abrasive wear
di: Higuera-Cobos, Oscar Fabián, et al.
Pubblicazione: (2017)

Stress-strain and penetration characteristics of clay modified with crumb rubber
di: Vijayasimhan, Sivapriya
Pubblicazione: (2018)

Implementation of an automated dry sand/wet sand rubber wheel tribometer for the evaluation of abrasive wear in materials
di: Rodríguez-Peña, Alfonso; Universidad del Atlántico, et al.
Pubblicazione: (2023)

Ecoladrillos: An alternative for the Use of Recycled Clay and Rubber Grain
di: Gambin-Martínez, Juan Sebastián, et al.
Pubblicazione: (2023)

Ceramic Coatings Resistant to Wear and Thermal Shock at High Temperatures
di: Ferrer Pacheco, Martha Yasmid, et al.
Pubblicazione: (2023)

Improvement of abrasive wear resistance of the high chromium cast iron ASTM A-532 through thermal treatment cycles
di: Higuera-Cobos, Oscar Fabián, et al.
Pubblicazione: (2016)

Efecto ciclos de humedecimiento/secado y calentamiento/enfriamiento en la resistencia geomecánica de las rocas lodosas, formación lutitas de Macanal
di: Chaparro Barrera, Camilo Andrés
Pubblicazione: (2021)

Manufacture of titanium dioxide scaffolds for medical applications
di: Cuervo-Osorio, Giovanni, et al.
Pubblicazione: (2018)

Characterization of DLC/Si coatings under the influence of a simulated biological fluid
di: Vargas, William, et al.
Pubblicazione: (2016)

Calibration of rising plate meter in prairie kikuyo grass (Pennisetum Clandestinum Hochst.Ex Chiov) in the high colombian tropics
di: Moreno, Diego, et al.
Pubblicazione: (2019)

Obtención y caracterización de un acero pulvimetalúrgico AISI 316 con adición de titanio 1%
di: Vargas Ayala, Yesid Darío
Pubblicazione: (2020)

Estudio de prefactibilidad para la creación de una empresa dedicada al aprovechamiento de llantas usadas para la elaboración de muebles ecológicos en el municipio de Chiquinquirá
di: Murcia Peraza, Deissy Lorena, et al.
Pubblicazione: (2019)

Gestión integral de la industria cauchera en el municipio de San José del Guaviare, Colombia
di: Montoya-Rojas, Grace Andrea, et al.
Pubblicazione: (2017)

Efecto de sistemas de sangría sobre la productividad de Hevea brasiliensis en el Magdalena Medio Santandereano
di: Rojas Molina, Jairo, et al.
Pubblicazione: (2017)

Efectos de un programa de actividad física multimodal sobre los índices de estrés (Síndrome de agotamiento) en empleados del SENA
di: Roa Flórez, Fabián Yesid
Pubblicazione: (2022)

Valuation of the Durability of the Concrete Used in the Precast Great Soviet Panel System
di: Socarrás-Cordoví, Yamila Concepción, et al.
Pubblicazione: (2020)

Composites with pineapple-leaf fibers manufactured by layered compression molding
di: Hoyos Arango, David Bernardo, et al.
Pubblicazione: (2021)

Evaluación del efecto del material particulado de la formación carbonera 7 para el Bloque Garzas, Pecol Energy
di: Casallas Pedraza, Daniel Ricardo, et al.
Pubblicazione: (2020)

Investigación aplicada a la modelación del territorio a partir del análisis geomorfológico de las planchas 192IIC, 193IB, 193ID, 193IIA escala 1: 25.000
di: Patiño Rozo, Geison Alexander
Pubblicazione: (2018)

Revisión histórica de movimientos en masa en el departamento de Boyacá, dentro del marco del proyecto de investigación aplicada a la modelación del territorio a partir del análisis geomorfológico del departamento de Boyacá
di: Cuy Cipamocha, Juan David
Pubblicazione: (2017)

Presentation Special Section: Books, Ways of Reading and Readers in Colombia and Latin America
di: Loaiza Cano, Gilberto
Pubblicazione: (2016)

Pozzolanic benefit of fly ash and steel slag blends in the development of uniaxial compressive strength of lime stabilized soil
di: James, Jijo, et al.
Pubblicazione: (2018)

Evaluation of a rubber nitrile stopper as container-closure system of Gavac® vaccine
di: Pérez-Sánchez, Amaury, et al.
Pubblicazione: (2020)

Rubber tapping system effect on the productivity of Hevea brasiliensis in the Colombian Middle Magdalena
di: Rojas M., Jairo, et al.
Pubblicazione: (2017)

Wear behavior of electroless Ni-B Coatings on magnesium surfaces
di: Castaño, Juan Guillermo, et al.
Pubblicazione: (2021)

Wear Behavior of Bioactive Glass Coatings Deposited by Thermal Spraying
di: Monsalve-Arias, Mónica-Johanna, et al.
Pubblicazione: (2022)

Calculation of a basic quality of life indicator of sections for Bogotá by census trough factorial analysis
di: Garcia Garcia, Diva Marcela, et al.
Pubblicazione: (2019)

Efecto del grano de caucho en el ahuellamiento de una mezcla asfáltica tipo MD-12
di: Olarte Riaño, Brandon Nicolás, et al.
Pubblicazione: (2020)

Evaluación tribológica y corrosiva de recubrimientos de COCRWC obtenidos mediante proyección térmica por llama, tratados térmicamente
di: Acuña Rodríguez, Sandra Marcela
Pubblicazione: (2021)

Detailed stratigraphic study of La Paila formation in the La Uribe-Sevilla section, hydrocarbon potential reservoir in the Cauca-Patía basin
di: Castaño-Dávila, Diana Lorena, et al.
Pubblicazione: (2009)

A look at the procedural guarantees and rights granted to IDP populations by the Constitutional Court of Colombia and their enforcement within the 1448 Act of 2011 in the section of land restitution
di: Vega-Pérez, Leonel, et al.
Pubblicazione: (2014)

La importancia de la investigación en la formación del licenciado en la educación a distancia
di: Galindo Borda, María Trinidad, et al.
Pubblicazione: (2021)

Capitalist globalization: mechanisms of economic and political regulation
di: Jiménez, William Ortiz
Pubblicazione: (2012)

Morphology, mechanical strength and degradation of polyhydroxyalkanoate scaffolds
di: Arroyave-Muñoz, Liliana Maria, et al.
Pubblicazione: (2018)

Physiotherapy students’ and teachers’ perception of assessment
di: Cáceres Bermón, Zoraya Trinidad, et al.
Pubblicazione: (2019)

Mechanisms of human rights protection in Colombia from pedagogy
di: Cifuentes-Medina, José Eriberto, et al.
Pubblicazione: (2014)

Mechanisms of financing and management of financial resources in the agricultural sector in Colombia
di: Ossa, Jahir Alexander Gutiérrez, et al.
Pubblicazione: (2014)

Quantum Mechanics in Coordinate and Moment Representations Through Three Simple Problems
di: Bolaños, E. J., et al.
Pubblicazione: (2021)