Characterization of DLC/Si coatings under the influence of a simulated biological fluid

Characterization of DLC/Si coatings under the influence of a simulated biological fluid

Mostra altre versioni (1)

One of the metals most used as biomaterial is the 316LVM steel. Nevertheless, it presents complications when used as permanent implant, due to the metallic ion release to the surrounding tissues, leading to higher number of interventions that the patients must undergo. Given this problem, it was stu...

Descrizione completa

Dettagli Bibliografici
Autori principali:	Vargas, William, Caballero-Gómez, José Luis, Aperador-Chaparro, Willian Arnulfo
Natura:	Online
Lingua:	spa
Pubblicazione:	Universidad Pedagógica y Tecnológica de Colombia 2016
Soggetti:	coatings micro-abrasion biological fluid Recubrimientos Microabrasión Fluido biológico
Accesso online:	https://revistas.uptc.edu.co/index.php/ingenieria/article/view/4133

Documenti analoghi

Simulation of operating conditions and working fluids for organic Rankine cycles
di: Hernández-Fernández, Nerio José, et al.
Pubblicazione: (2020)

Abrasive wear in wear plates and hard coatings applied by welding with shielded electrode
di: Marulanda-Arévalo, José Luddey, et al.
Pubblicazione: (2017)

Positioning system of a torch used in thermal spray coatings applications
di: Torres-Barahona, Edgar Absalón, et al.
Pubblicazione: (2016)

Magnetorological properties in mixtures of automotive oil with metallic particles
di: Ardila Barragan, Marco Antonio, et al.
Pubblicazione: (2010)

Corrosion Resistance at High Temperature of NiCrAlY and NiCrFeNbMoTiAl Coatings Deposited by APS
di: Tristancho-Reyes, José Luis, et al.
Pubblicazione: (2014)

Effect of heat treatment on the tribological properties of Nickel-Boron electroless coating
di: Arias, Sandra, et al.
Pubblicazione: (2018)

Floral and reproductive biology of Alpinia purpurata (Vieill.) K. Schum. (Zingiberaceae): An important tropical ornamental plant
di: França, Rozineide Pereira Alves de, et al.
Pubblicazione: (2020)

Glass sheets coated with TiO2-m and its cytotoxic effect on leukemic cells Molt4
di: Garcia-Diosa, Jaime A., et al.
Pubblicazione: (2021)

Ceramic Coatings Resistant to Wear and Thermal Shock at High Temperatures
di: Ferrer Pacheco, Martha Yasmid, et al.
Pubblicazione: (2023)

Effect of heat treatment on the tribological properties of Nickel-Boron electroless coating
di: Arias Torres, Sandra Milena, et al.
Pubblicazione: (2018)

Thermal fatigue behavior of new ceramic thermal barrier coatings obtained by the atmospheric plasma spray process
di: Carpio, Pablo, et al.
Pubblicazione: (2016)

Caracterización de recubrimientos DLC/SI bajo la influencia de un fluido biológico simulado
di: Aperador Chaparro, Willian Arnulfo, et al.
Pubblicazione: (2021)

Mechanical characterization by CVD-FBR aliminium coatings on austenitic stainless steel and the steam oxidation resistance
di: Pérez-Muñoz, Diego, et al.
Pubblicazione: (2015)

Magnetic nanoparticles of zinc and calcium for magnetic hyperthermia application
di: Jasso-Terán, Rosario Argentina, et al.
Pubblicazione: (2016)

Effect of cyclodextrin on the quality of blueberry fruits (Vaccinium corymbosum L.) cv. Biloxi
di: Roncancio-Chaparro, Richard Alexander, et al.
Pubblicazione: (2022)

BiolCol: Technological Platform for the Dissemination of the Biological Reference Collection of Aquatic Macroinvertebrates
di: Caicedo-Chacón, Luz-Yamile, et al.
Pubblicazione: (2023)

Implementation of an automated dry sand/wet sand rubber wheel tribometer for the evaluation of abrasive wear in materials
di: Rodríguez-Peña, Alfonso; Universidad del Atlántico, et al.
Pubblicazione: (2023)

Caracterización mecánica de multicapas W-DLC/Si-DLC depositadas por pulverización catódica para aplicaciones biomédicas
di: Caicedo, Julio Cesar, et al.
Pubblicazione: (2021)

Interaction between biological and chemistry fungicides and tomato pollinators
di: Silva-Neto, Carlos de Melo e, et al.
Pubblicazione: (2018)

Tota Lake Pollution and Biological Models for Genotoxicity Studies
di: Jaramillo-García, Diego F., et al.
Pubblicazione: (2020)

Effect of irrigation regime on the production of volatiles that affect the aroma of the pear variety Triumph of Vienna (Pyrus communis L.)
di: Vélez, Javier Enrique, et al.
Pubblicazione: (2019)

Assessment of the health status of citrus propagation material against Hop stunt viroid through biological and molecular diagnosis
di: Rodríguez-Mora, Diana Milena, et al.
Pubblicazione: (2024)

Effect of Thermal Cycling on Abrasive Wear Response of Cu-1.9Be-0.25(Co+Ni) Alloy
di: Higuera-Cobos, Oscar Fabián, et al.
Pubblicazione: (2020)

Thick section acrylonitrile rubber parts mechanical properties under compression and abrasive wear resistance
di: Velásquez-Restrepo, Sandra Milena, et al.
Pubblicazione: (2015)

Development of a refractory mold based on chamotte/plaster for jewelry micro-casting with pre-set emeralds
di: Londoño-Montes, Carlina Sofía, et al.
Pubblicazione: (2017)

CARACTERIZACIÓN MAGNETO-REOLÓGICA DE UN FLUIDO A BASE DE DESECHOS MINEROS
di: Rojas Reyes, Nestor Ricardo, et al.
Pubblicazione: (2017)

Guías teórico-prácticas de laboratorios de mecánica de fluidos e hidráulica
di: Paredes Ceballos, Myriam Yolanda; Universidad Pedagógica y Tecnológica de Colombia, et al.
Pubblicazione: (2022)

Implementation of a system of treatment with plasma for gases using a dielectric barrier discharge cell
di: Mora Mendoza, Eduin Yesid, et al.
Pubblicazione: (2014)

Parasitism of Trichogramma and predation of Chrysoperla on Compsus viridivittatus eggs, a Vitis vinifera pest, under laboratory conditions
di: Pinzón-Hamón, Diego Alonso, et al.
Pubblicazione: (2018)

Failed Co-Creation: The Case of the BCNStreet-Lab Project
di: Vidal-Rojas, Juan-Carlos, et al.
Pubblicazione: (2022)

Aprendizaje basado en problemas para la aprehensión del concepto de presión en fluidos
di: Cruz Guerra, Jhonn Edisson
Pubblicazione: (2023)

Implementación de hongos nematófagos para el control de parásitos gastrointestinales
di: Fernández-Jiménez, Mónica Alejandra, et al.
Pubblicazione: (2019)

Cartilla de divulgación de resultados : proyecto de investigación recubrimientos comestibles a base de ingredientes naturales, una alternativa para dar valor agregado y conservar la calidad de agraz durante el almacenamiento
di: López Córdoba, Alex, et al.
Pubblicazione: (2020)

Cartilla de divulgación de resultados : proyecto de investigación recubrimientos comestibles a base de ingredientes naturales, una alternativa para dar valor agregado y conservar la calidad de agraz durante el almacenamiento
di: López Córdoba, Alex; Universidad Pedagógica y Tecnológica de Colombia, et al.
Pubblicazione: (2020)

Efecto parasítico de Trichogramma y del depredador Chrysoperla sobre huevos de Compsus viridivittatus, plaga de Vitis vinifera, en laboratorio
di: Pinzón Hamón, Diego Alonso, et al.
Pubblicazione: (2019)

Report and diagnoses of Hambletonia pseudococcina Compere (Hymenoptera: Encyrtidae) and Pseudiastata sp. (Diptera: Drosophilidae): Natural enemies of Dysmicoccus brevipes (Cockerell) (Hemiptera: Pseudococcidae) in Valle del Cauca, Colombia
di: Kondo, Takumasa, et al.
Pubblicazione: (2022)

Microstructural evolution during austempering of a ASTM A-532 CLASS III type high chromium white cast iron undergoing abrasive wear
di: Higuera-Cobos, Oscar Fabián, et al.
Pubblicazione: (2017)

Recubrimientos de circona y alúmina por proyección térmica con llama : parámetros para obtener recubrimientos de alto punto de fusión.
di: Ferrer Pacheco, Martha Yasmid, et al.
Pubblicazione: (2019)

Recubrimientos de circona y alúmina por proyección térmica con llama : parámetros para obtener recubrimientos de alto punto de fusión.
di: Ferrer Pacheco, Martha Yasmid; Universidad Francisco de Paula Santander, et al.
Pubblicazione: (2018)

Evaluación de procesos para obtener ensilaje de residuos piscícolas para alimentación animal
di: Perea Román, Críspulo
Pubblicazione: (2017)