Improvement of abrasive wear resistance of the high chromium cast iron ASTM A-532 through thermal treatment cycles

Improvement of abrasive wear resistance of the high chromium cast iron ASTM A-532 through thermal treatment cycles

High-Chromium White Cast Iron is a material highly used in mining and drilling shafts for oil extraction, due to its high wear resistance. However, because of the austenitic matrix found in the as-cast state, an adequate heat treatment cycle is necessary. This paper studies the effects of different...

Полное описание

Библиографические подробности
Главные авторы:	Higuera-Cobos, Oscar Fabián, Dumitru, Florina-Diana, Mesa-Grajales, Dairo Hernán
Формат:	Online
Язык:	eng
Опубликовано:	Universidad Pedagógica y Tecnológica de Colombia 2016
Предметы:	high chromium white cast iron HCWCI white cast iron chromium carbides hardness wear testing austenite martensite fundiciones blancas de hierro fundición al alto cromo carburos de cromo austenita martensita
Online-ссылка:	https://revistas.uptc.edu.co/index.php/ingenieria/article/view/4141

Схожие документы

Microstructural evolution during austempering of a ASTM A-532 CLASS III type high chromium white cast iron undergoing abrasive wear
по: Higuera-Cobos, Oscar Fabián, и др.
Опубликовано: (2017)

Assessment of Chemically Modified Lignocellulose Waste for the Adsorption of Cr (VI)
по: Tejada-Tovar, Candelaria, и др.
Опубликовано: (2019)

Standardization of the process of smelting for sands with self-forgeling resins in the Military Industry Santa Bárbara Factory
по: Carvajal-Fernández, Lina Consuelo, и др.
Опубликовано: (2014)

Evaluation of the Enzymatic Hydrolysis of Wet White Assisted with Ultrasound to Obtain Hydrolyzed Collagen
по: Almonacid-Jiménez, Leidy Yaneth, и др.
Опубликовано: (2019)

Modeling of the friction factor in pressure pipes using Bayesian Learning Neural Networks
по: Ladino Moreno, Edgar Orlando, и др.
Опубликовано: (2022)

Determinación del tipo de moldeo para la fabricación de conectores de cobre vía horno basculante de crisol
по: Báez Pineda, Marinelsa
Опубликовано: (2020)

Morphological and structural characterization of ceramic shell waste in the investment casting process in FASAB Sogamoso
по: Grandas-Rincón, Isnardo Antonio, и др.
Опубликовано: (2017)

Development of a refractory mold based on chamotte/plaster for jewelry micro-casting with pre-set emeralds
по: Londoño-Montes, Carlina Sofía, и др.
Опубликовано: (2017)

Pulperos, pardos and indepeendence in Venezuela. 1812-1814
по: Tejada Soria, Jaika
Опубликовано: (2011)

Forjando talentos: el horno de inducción en los semilleros de investigación de la UPTC. Entrevista a Fabio Raúl Pérez Villamil
по: Puerto-Riscanevo, Salome
Опубликовано: (2022)

Evaluación de la reducción de pelets utilizando carbón como agente reductor
по: Pérez Velásquez, Sandra Patricia, и др.
Опубликовано: (2010)

Determinación de parámetros para obtención de acero a partir de un mineral de magnetita
по: Moreno Tristancho, Yeferson Danilo
Опубликовано: (2023)

Dunite´s different uses in the metallurgic industry in Cuba
по: Pons-Herrera, José Alberto, и др.
Опубликовано: (2007)

Magnetic catalysts based on Iron Oxides: Synthesis, Properties and Applications
по: Escobar, Angélica M., и др.
Опубликовано: (2018)

Study of the calcination process of two limonitic iron ores between 250 °C and 950 °C
по: Longa-Avello, Lisbeth, и др.
Опубликовано: (2017)

Digital geologic modeling applied to an iron ore open pit mine
по: Vieira- de-Moraes, Vandersoni Monteiro, и др.
Опубликовано: (2009)

Evolution of magnetic phases located in Boyacá clays subject to high temperatures
по: Ruge-Guerrero, Oscar Orlando, и др.
Опубликовано: (2016)

Removal of lubricant added to iron powder metallurgy, with abnormal plasma discharge glow
по: Rodríguez-Fonseca, Pedro Vicente, и др.
Опубликовано: (2016)

Determination of the Inside Diameter of Pressure Pipes for Drinking Water Systems Using Artificial Neural Networks
по: García-Ubaque, Cesar-Augusto, и др.
Опубликовано: (2022)

Estado del arte del recubrimiento de conversión de cromo trivalente en la aleación de aluminio 2024-T3 en la industria aeronáutica y aeroespacial
по: Suárez Romero, Holmes Daniel
Опубликовано: (2022)

Remoción de fosfato de ambientes acuáticos utilizando nanopartículas modificadas de Fe-Co/Quitosan
по: Issaian, Tadeh, и др.
Опубликовано: (2020)

Estudio y modelamiento del proceso de fabricación de barras tubulares de bronce SAE 65 por colada continúa para la empresa Formaq S.A.S
по: Cerinza Pinzón, Carlos Hernán
Опубликовано: (2020)

Recuperación de materiales metálicos en escorias del proceso de soldadura de arco sumergido en la empresa HB SADELEC
по: Chinome Moreno, Raúl
Опубликовано: (2020)

Diseño de un prototipo de impresora 3D que aplica la técnica de prototipado rápido modelado por deposición fundida
по: León Medina, Jersson Xavier, и др.
Опубликовано: (2019)

Synthesis of an Anticorrosive Pigment by Thermal Treatment of Iron Oxides from Steel Industry Wastes
по: Colpas-Ruiz, María Angélica, и др.
Опубликовано: (2019)

Evaluación de la corrosión-erosión en aceros austeníticos y martensíticos. (Evaluation for Corrosion-Erosion in Austenitic and Martensitic Steels.)
по: Aperador Chaparro, W., и др.
Опубликовано: (2015)

Caracterización de materiales reciclables usados como estructura en la fabricación de modelos para fundición por gravedad
по: Serrato Pérez, Cristian Camilo
Опубликовано: (2022)

Análisis para mejoramiento de la producción de productos representativos de la Empresa Fundicom S.A.S, fábrica Mosquera Cundinamarca
по: Jiménez Rueda, Fabián Ricardo
Опубликовано: (2017)

Mechanical characterization by CVD-FBR aliminium coatings on austenitic stainless steel and the steam oxidation resistance
по: Pérez-Muñoz, Diego, и др.
Опубликовано: (2015)

Microstructure and mechanical properties of GTAW welded joints of AA6105 aluminum alloy
по: Dorta-Almenara, Minerva, и др.
Опубликовано: (2016)

Effect of Silicon Addition on Microstructure and Mechanical Properties of Chromium and Titanium Based Coatings
по: Ardila-Téllez, Luis Carlos, и др.
Опубликовано: (2014)

Equilibrium and thermodynamics of Chromium (VI) adsorption on inert biomasses of Dioscorea rotundata and Elaeis guineensis
по: Villabona-Ortíz, Angel, и др.
Опубликовано: (2024)

Abrasive wear in wear plates and hard coatings applied by welding with shielded electrode
по: Marulanda-Arévalo, José Luddey, и др.
Опубликовано: (2017)

Thick section acrylonitrile rubber parts mechanical properties under compression and abrasive wear resistance
по: Velásquez-Restrepo, Sandra Milena, и др.
Опубликовано: (2015)

Implementation of an automated dry sand/wet sand rubber wheel tribometer for the evaluation of abrasive wear in materials
по: Rodríguez-Peña, Alfonso; Universidad del Atlántico, и др.
Опубликовано: (2023)

Microstructural Characterization of a Magnesium Alloy Processed by Equal Channel Angular Pressing
по: Dumitru, Florina Diana, и др.
Опубликовано: (2014)

Effect of Thermal Cycling on Abrasive Wear Response of Cu-1.9Be-0.25(Co+Ni) Alloy
по: Higuera-Cobos, Oscar Fabián, и др.
Опубликовано: (2020)

Estudio de la soldabilidad del acero estructural ASTM A572 grado 50 con proceso SMAW
по: Hernández Parra, Yody Maricela
Опубликовано: (2020)

Análisis comparativo con procesos de soldadura gmaw y gtaw generando fallas inducidas en acero al carbono ASTM a 53 GR B
по: Gil Rubiano, Marilyn
Опубликовано: (2020)

Evaluación de la corrosión del acero ASTM A335 P92 sometido a altas temperaturas bajo una atmósfera de oxidación-nitridación típica de una refinería
по: Kafarov, Viatcheslav, и др.
Опубликовано: (2021)