Positioning system of a torch used in thermal spray coatings applications

Positioning system of a torch used in thermal spray coatings applications

This paper presents the design, construction and performance evaluation of a positioning system used for the deposition of coatings with molten particles, by using a torch CastoDyn Ds 8000 thermal spray with oxyacetylene combustion. The design has been done with parameters obtained in the laboratory...

Descrizione completa

Dettagli Bibliografici
Autori principali:	Torres-Barahona, Edgar Absalón, Moreno-Téllez, Carlos Mauricio, Pinto-Salamanca, María Luisa, Cárdenas, Leydi Julieta, Fuentes-Mojica, Juan David
Natura:	Online
Lingua:	spa
Pubblicazione:	Universidad Pedagógica y Tecnológica de Colombia - UPTC 2016
Soggetti:	thermal spray coating electromechanical design diseño electromecánico recubrimiento por proyección térmica
Accesso online:	https://revistas.uptc.edu.co/index.php/ingenieria_sogamoso/article/view/5446

Documenti analoghi

Thermal fatigue behavior of new ceramic thermal barrier coatings obtained by the atmospheric plasma spray process
di: Carpio, Pablo, et al.
Pubblicazione: (2016)

Ceramic Coatings Resistant to Wear and Thermal Shock at High Temperatures
di: Ferrer Pacheco, Martha Yasmid, et al.
Pubblicazione: (2023)

Wear Behavior of Bioactive Glass Coatings Deposited by Thermal Spraying
di: Monsalve-Arias, Mónica-Johanna, et al.
Pubblicazione: (2022)

Recubrimientos de circona y alúmina por proyección térmica con llama : parámetros para obtener recubrimientos de alto punto de fusión.
di: Ferrer Pacheco, Martha Yasmid, et al.
Pubblicazione: (2019)

Recubrimientos de circona y alúmina por proyección térmica con llama : parámetros para obtener recubrimientos de alto punto de fusión.
di: Ferrer Pacheco, Martha Yasmid; Universidad Francisco de Paula Santander, et al.
Pubblicazione: (2018)

Characterization of DLC/Si coatings under the influence of a simulated biological fluid
di: Vargas, William, et al.
Pubblicazione: (2016)

Analysis of patents related to microencapsulation with yam (Dioscorea Rotundata) coatings by spray drying
di: Rodríguez-Manrique, Jhonatan, et al.
Pubblicazione: (2021)

Solar thermal and electricity. A state of the art
di: Bravo Hidalgo, Debrayan, et al.
Pubblicazione: (2020)

Corrosion Resistance at High Temperature of NiCrAlY and NiCrFeNbMoTiAl Coatings Deposited by APS
di: Tristancho-Reyes, José Luis, et al.
Pubblicazione: (2014)

Effect of heat treatment on the tribological properties of Nickel-Boron electroless coating
di: Arias, Sandra, et al.
Pubblicazione: (2018)

Determinación Experimental de la Conductividad Térmica Efectiva en Bloques Extinguidos de Arcilla Roja. (Experimental Determination of the Eective Thermal Conductivity in the Extruded Red Clay Bricks.)
di: Peña Rodríguez, G., et al.
Pubblicazione: (2015)

Glass sheets coated with TiO2-m and its cytotoxic effect on leukemic cells Molt4
di: Garcia-Diosa, Jaime A., et al.
Pubblicazione: (2021)

Effect of heat treatment on the tribological properties of Nickel-Boron electroless coating
di: Arias Torres, Sandra Milena, et al.
Pubblicazione: (2018)

Structural, elastic, electronic and thermal properties of InAs: A study of functional density
di: Mendoza-Estrada, Víctor, et al.
Pubblicazione: (2017)

Diseño e implementación de un equipo de recubrimiento por spray térmico
di: Cárdenas Flechas, Leydi Julieta, et al.
Pubblicazione: (2019)

Mechanical characterization by CVD-FBR aliminium coatings on austenitic stainless steel and the steam oxidation resistance
di: Pérez-Muñoz, Diego, et al.
Pubblicazione: (2015)

Effect of cyclodextrin on the quality of blueberry fruits (Vaccinium corymbosum L.) cv. Biloxi
di: Roncancio-Chaparro, Richard Alexander, et al.
Pubblicazione: (2022)

Study of the calcination process of two limonitic iron ores between 250 °C and 950 °C
di: Longa-Avello, Lisbeth, et al.
Pubblicazione: (2017)

Diseño eléctrico y fabricación de un elevador de carga (Formadora ASC) en el proceso de transporte de lámina galvanizada de la empresa Corpacero
di: Vargas Martínez, Cristian Duván
Pubblicazione: (2024)

Rational efficiency in agro-industrial process with cold chain: Thermodynamic and exergoeconomic measurement
di: Cely-Niño, Víctor Hugo, et al.
Pubblicazione: (2018)

Near-Field Thermal Transistor InSb/WSM/InSb
di: Villamil-Malagon, D., et al.
Pubblicazione: (2023)

Abrasive wear in wear plates and hard coatings applied by welding with shielded electrode
di: Marulanda-Arévalo, José Luddey, et al.
Pubblicazione: (2017)

Use of thermal water as a natural coagulant for domestic wastewater sustainable treatment
di: Quintero-Jaramillo, Javier Andrés, et al.
Pubblicazione: (2017)

Diseño electromecánico de estación automatizada para carga y almacenamiento de bicicletas eléctricas alimentada por un sistema de generación de energía solar fotovoltaica
di: Arévalo Ascuntar, Héctor Alejandro, et al.
Pubblicazione: (2024)

Desarrollo de un prototipo de sistema de extracción electromecánico para toma de muestras de agua dulce
di: Tobo Pérez, Mario Yamid
Pubblicazione: (2024)

Evaluación tribológica y corrosiva de recubrimientos de COCRWC obtenidos mediante proyección térmica por llama, tratados térmicamente
di: Acuña Rodríguez, Sandra Marcela
Pubblicazione: (2021)

Polymeric Ablative Composite Materials and their Application in the Manufacture of Aerospace Propulsion Components
di: Robayo-Salazar, Rafael, et al.
Pubblicazione: (2020)

Influence of porosity on thermal conductivity effective of ceramic coatings ysz used as thermal barrier
di: Cano Marín, Maria Ximena, et al.
Pubblicazione: (2021)

Termodinámica : térmicas III
di: Salcedo Vera, Hugo Eliécer, et al.
Pubblicazione: (2016)

Software tool for design of three-dimensional positioning systems used in digital manufacturing
di: León-Medina, Jersson Xavier, et al.
Pubblicazione: (2016)

Construcción de un aparato de flujo de calor radial para calcular la energía de interfase sólida-líquida en aleaciones ternarias
di: Carreño Bodensiek, Carlos Guillermo, et al.
Pubblicazione: (2016)

Synthesis of an Anticorrosive Pigment by Thermal Treatment of Iron Oxides from Steel Industry Wastes
di: Colpas-Ruiz, María Angélica, et al.
Pubblicazione: (2019)

Positioning system applied to the 3D printing technique: modeling by fused deposition
di: Barahona, Edgar Absalón Torres, et al.
Pubblicazione: (2012)

Estimation of Population Growth Trajectories from Night Time Light DMSP-OLS in the four main cities of Colombia
di: Rodríguez Mariaca, Diego Alejandro, et al.
Pubblicazione: (2019)

Effects of corm size and benzylaminopurine on plantain proliferation in two propagation environments
di: Espinoza González, Jorge, et al.
Pubblicazione: (2022)

Referencias y proyección empleadas en la cartografía colombiana
di: Serrato Álvarez, Pedro Karin
Pubblicazione: (2011)

Cartilla de divulgación de resultados : proyecto de investigación recubrimientos comestibles a base de ingredientes naturales, una alternativa para dar valor agregado y conservar la calidad de agraz durante el almacenamiento
di: López Córdoba, Alex, et al.
Pubblicazione: (2020)

Cartilla de divulgación de resultados : proyecto de investigación recubrimientos comestibles a base de ingredientes naturales, una alternativa para dar valor agregado y conservar la calidad de agraz durante el almacenamiento
di: López Córdoba, Alex; Universidad Pedagógica y Tecnológica de Colombia, et al.
Pubblicazione: (2020)

Cine Club Corral de Piedra : un espacio de aprendizaje desde una perspectiva de educación no formal en el municipio de Tibasosa
di: Ríos López, Daniel José
Pubblicazione: (2024)

Responsabilidad social universitaria: una mirada desde América Latina y Colombia
di: Sissa Dueñas, María Alejandra
Pubblicazione: (2017)