Microstructural evolution during austempering of a ASTM A-532 CLASS III type high chromium white cast iron undergoing abrasive wear

Microstructural evolution during austempering of a ASTM A-532 CLASS III type high chromium white cast iron undergoing abrasive wear

This paper studies the influence of variables such as holding temperatures and times during austempering of High Chromium White Cast Iron (HCWCI), with the following chemical composition: Cr 25 %, C 3 %, Si 0.47 %, Mn 0.74 % and Mo 1.02 %. The aim of the austempering was to modify the percentage of...

Descrizione completa

Dettagli Bibliografici
Autori principali:	Higuera-Cobos, Oscar Fabián, Bucurú-Vasco, Jeison, Loaiza-Patiño, Andrés Felipe, Monsalve-Arias, Mónica Johanna, Mesa-Grajales, Dairo Hernán
Natura:	Online
Lingua:	eng
Pubblicazione:	Universidad Pedagógica y Tecnológica de Colombia 2017
Soggetti:	Austempered Retained austenite Abrasive wear High chromium white cast iron Chromium carbides Austemperado Austenita retenida Desgaste abrasivo Fundiciones al alto cromo Carburos de cromo
Accesso online:	https://revistas.uptc.edu.co/index.php/ingenieria/article/view/7319

Documenti analoghi

Improvement of abrasive wear resistance of the high chromium cast iron ASTM A-532 through thermal treatment cycles
di: Higuera-Cobos, Oscar Fabián, et al.
Pubblicazione: (2016)

Assessment of Chemically Modified Lignocellulose Waste for the Adsorption of Cr (VI)
di: Tejada-Tovar, Candelaria, et al.
Pubblicazione: (2019)

Thick section acrylonitrile rubber parts mechanical properties under compression and abrasive wear resistance
di: Velásquez-Restrepo, Sandra Milena, et al.
Pubblicazione: (2015)

Effect of Thermal Cycling on Abrasive Wear Response of Cu-1.9Be-0.25(Co+Ni) Alloy
di: Higuera-Cobos, Oscar Fabián, et al.
Pubblicazione: (2020)

Estado del arte del recubrimiento de conversión de cromo trivalente en la aleación de aluminio 2024-T3 en la industria aeronáutica y aeroespacial
di: Suárez Romero, Holmes Daniel
Pubblicazione: (2022)

Physical modelling in reduced dimensions of contention walls made of reinforced earth by Geo-textile
di: Espitia-López, Jairo Martín, et al.
Pubblicazione: (2007)

Effect of Silicon Addition on Microstructure and Mechanical Properties of Chromium and Titanium Based Coatings
di: Ardila-Téllez, Luis Carlos, et al.
Pubblicazione: (2014)

Equilibrium and thermodynamics of Chromium (VI) adsorption on inert biomasses of Dioscorea rotundata and Elaeis guineensis
di: Villabona-Ortíz, Angel, et al.
Pubblicazione: (2024)

Abrasive wear in wear plates and hard coatings applied by welding with shielded electrode
di: Marulanda-Arévalo, José Luddey, et al.
Pubblicazione: (2017)

Implementation of an automated dry sand/wet sand rubber wheel tribometer for the evaluation of abrasive wear in materials
di: Rodríguez-Peña, Alfonso; Universidad del Atlántico, et al.
Pubblicazione: (2023)

Microparticle manipulation by a four-spiral electrode microstructure
di: Julio Enrique Duarte, Joseph Samitier Marti, Flavio Humberto Fernández Morales,
Pubblicazione: (2010)

Microstructure and mechanical properties of GTAW welded joints of AA6105 aluminum alloy
di: Dorta-Almenara, Minerva, et al.
Pubblicazione: (2016)

Microstructural Characterization of a Magnesium Alloy Processed by Equal Channel Angular Pressing
di: Dumitru, Florina Diana, et al.
Pubblicazione: (2014)

Youth Subjectivities, Political Expressions and use of Digital Technologies
di: Bermúdez Grajales, Mónica María
Pubblicazione: (2017)

Flora de los páramos de Antioquia
di: Díaz Vasco, Oswaldo, et al.
Pubblicazione: (2021)

Biofuel Production and Rural Employment in Colombia 2009-2015
di: Barrientos Marin, Jorge, et al.
Pubblicazione: (2020)

Incidencias de los IFRS en el manual de políticas contables
di: Grajales Londoño, Gherson, et al.
Pubblicazione: (2021)

La enseñanza de la radioactividad con perspectiva de género: una estrategia para reflexionar sobre el papel de la mujer en la ciencia
di: Gacía Martínez, Alvaro, et al.
Pubblicazione: (2021)

Estudio de la soldabilidad del acero estructural ASTM A572 grado 50 con proceso SMAW
di: Hernández Parra, Yody Maricela
Pubblicazione: (2020)

Síntesis y caracterización de la aleación AL -TI-C empleando carbono nanométrico como precursor Effect of nanocarbon additions as a precursor in the microstructure of an Al-Ti-C Alloy: synthesis and structural characterization
di: Figueroa Vargas, Ignacio Alejandro, et al.
Pubblicazione: (2021)

Machine learning algorithms for prediction of physicochemical soil properties by spectral information: a systematic review
di: Vargas-Zapata, Mateo, et al.
Pubblicazione: (2022)

Percepción de estudiantes universitarios sobre la cadena perpetua para abusadores sexuales de menores
di: Ceballos Ruiz, Paula Andrea, et al.
Pubblicazione: (2023)

Análisis comparativo con procesos de soldadura gmaw y gtaw generando fallas inducidas en acero al carbono ASTM a 53 GR B
di: Gil Rubiano, Marilyn
Pubblicazione: (2020)

Evaluación de la corrosión del acero ASTM A335 P92 sometido a altas temperaturas bajo una atmósfera de oxidación-nitridación típica de una refinería
di: Kafarov, Viatcheslav, et al.
Pubblicazione: (2021)

Evaluación de la formación de carburos, en un material ASTM a 516 grado 70, afectado por un proceso de soldadura FCAW y temperaturas superiores a 427 ° c.
di: Alvarado Moreno, Alexander
Pubblicazione: (2022)