Composites with pineapple-leaf fibers manufactured by layered compression molding

Composites with pineapple-leaf fibers manufactured by layered compression molding

Spa: Se utilizó el proceso de moldeo por compresión para la fabricación de compuestos de matriz polimérica reforzados con fibra de hoja de piña. Para la fabricación de las muestras se utilizaron cuatro láminas de polipropileno de 0.76 mm de espesor y las fibras se distribuyeron igualmente entre ésta...

Cur síos iomlán

Sonraí bibleagrafaíochta
Príomhchruthaitheoirí:	Hoyos Arango, David Bernardo, Jaramillo Quiceno, Natalia, Santa Marín, Juan Felipe
Formáid:	Documento de Conferencia
Teanga:	spa
Foilsithe / Cruthaithe:	2021
Rochtain ar líne:	http://repositorio.uptc.edu.co/handle/001/7143

Míreanna comhchosúla

Mechanical behavior of chontaduro (Bactris Gapisapes) fiber reinforced material composite
de réir: Villate Diaz, Juan Pablo, et al.
Foilsithe / Cruthaithe: (2018)

Polymeric Ablative Composite Materials and their Application in the Manufacture of Aerospace Propulsion Components
de réir: Robayo-Salazar, Rafael, et al.
Foilsithe / Cruthaithe: (2020)

Preparation of a Composite Material from Palm Oil Fiber and an Ecological Emulsion of Expanded Polystyrene Post-Consumption
de réir: Gutiérrez-Estupiñán, Cindy, et al.
Foilsithe / Cruthaithe: (2020)

Thick section acrylonitrile rubber parts mechanical properties under compression and abrasive wear resistance
de réir: Velásquez-Restrepo, Sandra Milena, et al.
Foilsithe / Cruthaithe: (2015)

Effect of copper-enriched layers on localized corrosion of aluminium-copper alloys
de réir: Arenas-Vara, María Ángeles, et al.
Foilsithe / Cruthaithe: (2018)

Propiedades magnéticas de aleaciones MNBI obtenidas mediante colada por succión en molde de cobre magnetic properties of MNBI alloys prepared by copper-mold suction casting
de réir: Betancourt, I., et al.
Foilsithe / Cruthaithe: (2021)

Humic substances decrease the stress in layer hens during the post molting phase
de réir: Sanmiguel-Plazas, Rosa Angélica, et al.
Foilsithe / Cruthaithe: (2015)

Reconfigurable architecture based on fiber bragg gratings for indoor networks
de réir: Puerto-Leguizamón, Gustavo Adolfo, et al.
Foilsithe / Cruthaithe: (2017)

Effect of the acid degradation on the properties of polyester reinforced with glass fibers
de réir: Lara-González, Luis Ángel
Foilsithe / Cruthaithe: (2010)

Indicadores para herramientas lean manufacturing
de réir: Amaya González, Luis Felipe, et al.
Foilsithe / Cruthaithe: (2021)

Evaluation of Load Capacity of Stratified Soils (2 Layers) by Means of Numerical Analytical Comparison
de réir: Quintero-Chamorro, Jairo Alejandro, et al.
Foilsithe / Cruthaithe: (2021)

Diazotrophic bacteria in the growth of micropropagated ornamental pineapple
de réir: Silva, Adriano Bortolotti, et al.
Foilsithe / Cruthaithe: (2019)

Core/shell fibers of Carboxymethylcellulose/Poly(lactic acid) loaded with Curcumin.
de réir: León Pérez, Jadileyg Gabriela, et al.
Foilsithe / Cruthaithe: (2020)

Pozzolanic benefit of fly ash and steel slag blends in the development of uniaxial compressive strength of lime stabilized soil
de réir: James, Jijo, et al.
Foilsithe / Cruthaithe: (2018)

Development of a refractory mold based on chamotte/plaster for jewelry micro-casting with pre-set emeralds
de réir: Londoño-Montes, Carlina Sofía, et al.
Foilsithe / Cruthaithe: (2017)

Fluorescence of chlorophyll a in pineapple plants submitted to herbicide applications
de réir: Corrêa, Juliano Miari, et al.
Foilsithe / Cruthaithe: (2018)

Intelligent system for weeds management in pineapple crop with precision agriculture concepts
de réir: JIMÉNEZ LÓPEZ, ANDRÉS FERNANDO, et al.
Foilsithe / Cruthaithe: (2020)

Manufacture of titanium dioxide scaffolds for medical applications
de réir: Cuervo-Osorio, Giovanni, et al.
Foilsithe / Cruthaithe: (2018)

Response in root development of Arabidopsis thaliana to leaf extract of Moringa oleifera
de réir: Ortiz-Rojas, Luz Yineth, et al.
Foilsithe / Cruthaithe: (2017)

Allelopathic effects of jack bean leaf aqueous extract on safflower cultures
de réir: Seabra Júnior, Edward, et al.
Foilsithe / Cruthaithe: (2018)

Leaf area and intermittent misting on hop plants propagation by stem cuttings
de réir: Gomes, Erik Nunes, et al.
Foilsithe / Cruthaithe: (2018)

Leaf area and intermittent misting on hop plants propagation by stem cuttings
de réir: Gomes, Erik Nunes, et al.
Foilsithe / Cruthaithe: (2019)

Allelopathic effects of jack bean leaf aqueous extract on safflower cultures
de réir: Seabra Junior, Edward, et al.
Foilsithe / Cruthaithe: (2019)

Characterization of the innovation management in manufacturing sector enterprises of Boyacá
de réir: Vásquez, José Luis Cruz, et al.
Foilsithe / Cruthaithe: (2011)

Office and school furniture manufacture from paper waste
de réir: Martínez-Mendoza, Eduardo, et al.
Foilsithe / Cruthaithe: (2015)

The Global Value Chains of Manufacturing in Mexico (2005-2015)
de réir: Medina Chamorro, Flor Amparo, et al.
Foilsithe / Cruthaithe: (2020)

Dynamics of leaf, flower and fruit abscission in avocado cv. Hass in Antioquia, Colombia
de réir: Bernal-Estrada, Jorge Alonso, et al.
Foilsithe / Cruthaithe: (2020)

The Composition of the Biography in the English Literature
de réir: Surghi, Carlos
Foilsithe / Cruthaithe: (2020)

Effects of technological cooperation on the innovative activity of the colombian manufacturing sector
de réir: Castillo-Molina, Yury Yohana, et al.
Foilsithe / Cruthaithe: (2021)

The importance of additive technology and manufacturing processes for laboratory experiments in aeronautics
de réir: Tilvaldyev, Shehret A., et al.
Foilsithe / Cruthaithe: (2023)

Capital gain, real wages and labor efficiency in the manufacturing sector in Colombia
de réir: Méndez-Sayago, Jhon Alexander
Foilsithe / Cruthaithe: (2014)

Study of application of industrial design in the manufacturing sector in the industrial corridor of Boyacá
de réir: Ramirez Leon, Cecilia
Foilsithe / Cruthaithe: (2011)

On integer compositions using SageMath
de réir: Mantilla Rozo, Jazmín Liseth, et al.
Foilsithe / Cruthaithe: (2022)

Diagnosis and Recommendation Integrated System (DRIS) for pineapple (Ananas comosus), Honey Gold variety (MD-2)
de réir: López-Montoya, Jennifer, et al.
Foilsithe / Cruthaithe: (2018)

Use of the FINCAS Application to Assess the Sustainability of Pineapple (Ananas comosus L.) Production Systems in Aguazul (Colombia)
de réir: Sánchez-Rojas, Edwin Fernando, et al.
Foilsithe / Cruthaithe: (2023)

Effect of colchicine on Kalanchoe daigremontiana Raym.-Hamet & H.Perrier (Crassulaceae) leaf morphology and stomates
de réir: Salazar M., Seir Antonio, et al.
Foilsithe / Cruthaithe: (2018)

Growth analysis of green-leaf lettuce under different sources and doses of organic and mineral fertilization
de réir: Ribeiro, Rúbia Rejane, et al.
Foilsithe / Cruthaithe: (2019)

Software tool for design of three-dimensional positioning systems used in digital manufacturing
de réir: León-Medina, Jersson Xavier, et al.
Foilsithe / Cruthaithe: (2016)

Effect of cutting and packaging type on the conservation of fresh-cut ‘Golden’ pineapple fruit [Ananas comosus (L.) Merr.]
de réir: Buitrago-Dueñas, Elkin Mauricio, et al.
Foilsithe / Cruthaithe: (2018)

Effect of mineral fertilization and organic fertilization on pineapple [Ananas comosus (L.) Merr.] cultivar MD2 (‘Golden’)
de réir: Marca-Huamancha, Carlos, et al.
Foilsithe / Cruthaithe: (2018)