Effect of Thermal Cycling on Abrasive Wear Response of Cu-1.9Be-0.25(Co+Ni) Alloy

Effect of Thermal Cycling on Abrasive Wear Response of Cu-1.9Be-0.25(Co+Ni) Alloy

Cu-Be alloys are considered high strength alloys when containing 0.2% to 2% of Be per weight, 0.2% to 2.7% of Co per weight, and up to 2.2% of Ni per weight, since they can present an elastic limit higher than 1380 MPa after aging (precipitation hardening), while, without heat treatment, they presen...

पूर्ण विवरण

ग्रंथसूची विवरण
मुख्य लेखकों:	Higuera-Cobos, Oscar Fabián, Moreno-Téllez, Carlos Mauricio, Pedraza-Yepes, Cristian Antonio
स्वरूप:	Online
भाषा:	eng
प्रकाशित:	Universidad Pedagógica y Tecnológica de Colombia 2020
विषय:	abrasive wear aging copper-beryllium alloy T6 aleación cobre-berilio desgaste abrasivo envejecido
ऑनलाइन पहुंच:	https://revistas.uptc.edu.co/index.php/ingenieria/article/view/11616

समान संसाधन

Thick section acrylonitrile rubber parts mechanical properties under compression and abrasive wear resistance
द्वारा: Velásquez-Restrepo, Sandra Milena, और अन्य
प्रकाशित: (2015)

Abrasive wear in wear plates and hard coatings applied by welding with shielded electrode
द्वारा: Marulanda-Arévalo, José Luddey, और अन्य
प्रकाशित: (2017)

Effect of copper-enriched layers on localized corrosion of aluminium-copper alloys
द्वारा: Arenas-Vara, María Ángeles, और अन्य
प्रकाशित: (2018)

Microstructural evolution during austempering of a ASTM A-532 CLASS III type high chromium white cast iron undergoing abrasive wear
द्वारा: Higuera-Cobos, Oscar Fabián, और अन्य
प्रकाशित: (2017)

Effect of impurities in the physical-chemical properties of a copper mineral leaching solution
द्वारा: Navarro, Patricio, और अन्य
प्रकाशित: (2016)

El perfil del trabajador autocontrolado
द्वारा: Delgado Mora, Jairo Omar
प्रकाशित: (2015)

Implementation of an automated dry sand/wet sand rubber wheel tribometer for the evaluation of abrasive wear in materials
द्वारा: Rodríguez-Peña, Alfonso; Universidad del Atlántico, और अन्य
प्रकाशित: (2023)

Ceramic Coatings Resistant to Wear and Thermal Shock at High Temperatures
द्वारा: Ferrer Pacheco, Martha Yasmid, और अन्य
प्रकाशित: (2023)

Evaluación de la degradación de superficies de fluorapatita mediante técnicas electroquímicas. (Degradation Assessment of Fluorapatite Surfaces using Electrochemical Techniques)
द्वारा: Reyes Jaimes, L. J., और अन्य
प्रकाशित: (2015)

Respuesta agroeconómica del cultivo de papa (Solanum tuberosum L.) bajo diferentes fuentes de fósforo, en Villapinzón, Cundinamarca
द्वारा: Hernández, Helber Manuel, और अन्य
प्रकाशित: (2012)

Lixiviation of copper content in pcb computer cards for the extraction of precious metals
द्वारा: Jiménez Tovar, Ginna Alejandra, और अन्य
प्रकाशित: (2018)

Improvement of abrasive wear resistance of the high chromium cast iron ASTM A-532 through thermal treatment cycles
द्वारा: Higuera-Cobos, Oscar Fabián, और अन्य
प्रकाशित: (2016)

Guía para la distribución de aplicaciones de visual basic 6.0
द्वारा: López López, Edgar Nelson
प्रकाशित: (2016)

Finite elements analysis of the deformation applied to the 6061-T6 aluminum alloy by equal channel angular pressing
द्वारा: Higuera-Cobos, Oscar Fabián, और अन्य
प्रकाशित: (2019)

Nitrate Ions’ Influence on the Alloy 22 Corrosion Behavior
द्वारा: Rincón-Ortiz, Mauricio, और अन्य
प्रकाशित: (2015)

Characterization of copper smelter slag and recovery of residual metals from these residues
द्वारा: Echeverry-Vargas, Luver, और अन्य
प्रकाशित: (2017)

Caracterización y aplicación del emprendedor y la innovación
प्रकाशित: (2021)

Assessment of the construction of social knowledge.
द्वारा: Saldarriaga Vélez, Óscar
प्रकाशित: (2010)

Characterization of DLC/Si coatings under the influence of a simulated biological fluid
द्वारा: Vargas, William, और अन्य
प्रकाशित: (2016)

Obtención y caracterización de un acero pulvimetalúrgico AISI 316 con adición de titanio 1%
द्वारा: Vargas Ayala, Yesid Darío
प्रकाशित: (2020)

Investigación aplicada a la modelación del territorio a partir del análisis geomorfológico de las planchas 192IIC, 193IB, 193ID, 193IIA escala 1: 25.000
द्वारा: Patiño Rozo, Geison Alexander
प्रकाशित: (2018)

Capacity of apatite formation of thin films of hydroxyapatite modified by laser ablation
द्वारा: Mizuno, Andrea Muñoz, और अन्य
प्रकाशित: (2019)

Producción y Caracterización del Sistema CaMn1-xTixO3 (Con x = 0.25, 0.5, 0.75)
द्वारा: Ríos Viasus, José del Carmen
प्रकाशित: (2019)

Efectos de un programa de actividad física multimodal sobre los índices de estrés (Síndrome de agotamiento) en empleados del SENA
द्वारा: Roa Flórez, Fabián Yesid
प्रकाशित: (2022)

Producción y caracterización de los sistemas Na1-xBaxCoO3 (0,25 < x < 0,75) Y Na0.5CoO3
द्वारा: Estrada Rodríguez, Carlos Augusto
प्रकाशित: (2019)

Evaluación del efecto del material particulado de la formación carbonera 7 para el Bloque Garzas, Pecol Energy
द्वारा: Casallas Pedraza, Daniel Ricardo, और अन्य
प्रकाशित: (2020)

Revisión histórica de movimientos en masa en el departamento de Boyacá, dentro del marco del proyecto de investigación aplicada a la modelación del territorio a partir del análisis geomorfológico del departamento de Boyacá
द्वारा: Cuy Cipamocha, Juan David
प्रकाशित: (2017)

Wear behavior of electroless Ni-B Coatings on magnesium surfaces
द्वारा: Castaño, Juan Guillermo, और अन्य
प्रकाशित: (2021)

Wear Behavior of Bioactive Glass Coatings Deposited by Thermal Spraying
द्वारा: Monsalve-Arias, Mónica-Johanna, और अन्य
प्रकाशित: (2022)

25 años en Medicina
द्वारा: Gómez Marmolejo, Claudia Ximena, और अन्य
प्रकाशित: (2021)

Microstructure and mechanical properties of GTAW welded joints of AA6105 aluminum alloy
द्वारा: Dorta-Almenara, Minerva, और अन्य
प्रकाशित: (2016)

Microstructural Characterization of a Magnesium Alloy Processed by Equal Channel Angular Pressing
द्वारा: Dumitru, Florina Diana, और अन्य
प्रकाशित: (2014)

Efecto del tratamiento termomecánico en la microestructura de un latón C-385
द्वारा: Pardo García, Daniel Francisco
प्रकाशित: (2020)

Evaluación tribológica y corrosiva de recubrimientos de COCRWC obtenidos mediante proyección térmica por llama, tratados térmicamente
द्वारा: Acuña Rodríguez, Sandra Marcela
प्रकाशित: (2021)

Editorial. Vol. 25, Núm. 1 (2020)
द्वारा: Perspectiva Geográfica, Editorial
प्रकाशित: (2020)

Editorial. Vol. 25, Núm. 2 (2020)
प्रकाशित: (2020)

Analysis of the Cycles of the Colombian Agricultural GDP 1976-2013
द्वारा: Chaves Castro, Alvaro Hernando
प्रकाशित: (2017)

Methodology to Prepare Patent Analysis and the Technological Maturity Cycle
द्वारा: Sinisterra, Santiago, और अन्य
प्रकाशित: (2023)

Cuestiones de Filosofía Núm. 25 versión completa
द्वारा: Diagama Briceño, Camilo Andrés
प्रकाशित: (2020)

Implementation of an electromagnetic system for controlling resistance and speed in indoor cycling
द्वारा: Moreno-González, Jairo A., और अन्य
प्रकाशित: (2018)