Effect of Thermal Cycling on Abrasive Wear Response of Cu-1.9Be-0.25(Co+Ni) Alloy
Cu-Be alloys are considered high strength alloys when containing 0.2% to 2% of Be per weight, 0.2% to 2.7% of Co per weight, and up to 2.2% of Ni per weight, since they can present an elastic limit higher than 1380 MPa after aging (precipitation hardening), while, without heat treatment, they presen...
主要な著者: | Higuera-Cobos, Oscar Fabián, Moreno-Téllez, Carlos Mauricio, Pedraza-Yepes, Cristian Antonio |
---|---|
フォーマット: | Online |
言語: | eng |
出版事項: |
Universidad Pedagógica y Tecnológica de Colombia
2020
|
主題: | |
オンライン・アクセス: | https://revistas.uptc.edu.co/index.php/ingenieria/article/view/11616 |
- 類似資料
-
Thick section acrylonitrile rubber parts mechanical properties under compression and abrasive wear resistance
著者:: Velásquez-Restrepo, Sandra Milena, 等
出版事項: (2015) -
Abrasive wear in wear plates and hard coatings applied by welding with shielded electrode
著者:: Marulanda-Arévalo, José Luddey, 等
出版事項: (2017) -
Effect of copper-enriched layers on localized corrosion of aluminium-copper alloys
著者:: Arenas-Vara, María Ángeles, 等
出版事項: (2018) -
Microstructural evolution during austempering of a ASTM A-532 CLASS III type high chromium white cast iron undergoing abrasive wear
著者:: Higuera-Cobos, Oscar Fabián, 等
出版事項: (2017) -
Effect of impurities in the physical-chemical properties of a copper mineral leaching solution
著者:: Navarro, Patricio, 等
出版事項: (2016)