Abrasive wear in wear plates and hard coatings applied by welding with shielded electrode
Performance against abrasive wear was evaluated (in compliance with the ASTM G-65 standard) for both wear plates and hard coatings applied by electric welding. The characterization of the coatings was achieved by using hardness tests, optical microscopy and scanning electron microscopy (SEM). Althou...
Главные авторы: | Marulanda-Arévalo, José Luddey, Cañas-Mendoza, Luz Adriana, Barón-Jaimez, Jairo Alberto |
---|---|
Формат: | Online |
Язык: | eng |
Опубликовано: |
Universidad Pedagógica y Tecnológica de Colombia
2017
|
Предметы: | |
Online-ссылка: | https://revistas.uptc.edu.co/index.php/ingenieria/article/view/7322 |
- Схожие документы
-
Implementation of an automated dry sand/wet sand rubber wheel tribometer for the evaluation of abrasive wear in materials
по: Rodríguez-Peña, Alfonso; Universidad del Atlántico, и др.
Опубликовано: (2023) -
Thick section acrylonitrile rubber parts mechanical properties under compression and abrasive wear resistance
по: Velásquez-Restrepo, Sandra Milena, и др.
Опубликовано: (2015) -
Effect of Thermal Cycling on Abrasive Wear Response of Cu-1.9Be-0.25(Co+Ni) Alloy
по: Higuera-Cobos, Oscar Fabián, и др.
Опубликовано: (2020) -
Microstructural evolution during austempering of a ASTM A-532 CLASS III type high chromium white cast iron undergoing abrasive wear
по: Higuera-Cobos, Oscar Fabián, и др.
Опубликовано: (2017) -
Improvement of abrasive wear resistance of the high chromium cast iron ASTM A-532 through thermal treatment cycles
по: Higuera-Cobos, Oscar Fabián, и др.
Опубликовано: (2016)